| dc.creator |
College of Aeronautics, (Cranfield) |
|
| dc.date |
2016-10-25T10:51:00Z |
|
| dc.date |
2016-10-25T10:51:00Z |
|
| dc.date |
1964-08 |
|
| dc.date.accessioned |
2022-05-09T10:03:03Z |
|
| dc.date.available |
2022-05-09T10:03:03Z |
|
| dc.identifier |
http://dspace.lib.cranfield.ac.uk/handle/1826/10857 |
|
| dc.identifier.uri |
https://reports.aerade.cranfield.ac.uk/handle/1826.2/4350 |
|
| dc.description |
Summary
Tools of SIP, RD107 and RD110 were tested at 300, 420 and 600 fpm
cutting speed with .10 in depth of cut and .010 in/rev feed on EN9 to
.030 in flankwear in order to find the constants in the expression
VTn = C for the three grades. The values of ‘n’ were found to be .51,
.53 and .46 and the values of C to be 4550, 4720 and 3620 for SIP,
RD107 and RD110 respectively. It was found that at 600 fpm the crater
wear of SIP was about a third of the wear of the other two grades. |
|
| dc.language |
en |
|
| dc.publisher |
College of Aeronautics |
|
| dc.relation |
CoA/M/M&P-49 |
|
| dc.relation |
49 |
|
| dc.title |
Test report no. PLBO/13: VTn curves for tools of grade SIP, RD107 and RD110 when machining EN9 |
|
| dc.type |
Report |
|