• Machine tool laboratory: appendix A to progress report no. 2 on the investigation into grinding of nickel chrome alloy EPK31 produced by Henry Wiggins 

  Purcell, J. (College of Aeronautics, )
• An annotated bibliography of presentation of information in aircraft cockpits 

  Fox, J. G.; Andrew, I. D. C.; Ferguson, I. (College of Aeronautics, )
• The relevance of the mechanics of metal cutting to machinability 

  Enahoro, H. E.; Welsh, M. J. M. (College of Aeronautics, )
• A preliminary evaluation of a new control-knob design for electronic equipment 

  Andrew, I. D. C.; Ferguson, I.; Talbot, R. J. (College of Aeronautics, )
• Hydraulic test rig 

  Healey, M. (College of Aeronautics, )
• Large scale metrology 

  Scarr, A. J. (College of Aeronautics, )
• An autocode programme to determine the flatness of a surface table using the least square mean plane criteria 

  Scarr, A. J. (College of Aeronautics, )
• Flow along tool-chip interface in orthogonal metal cutting 

  Enahoro, H. E.; Oxley, P. L. B. (College of Aeronautics, )
• A systems approach to the design of procedures necessary for the organisation of student training flights 

  College of Aeronautics, (Cranfield) (College of Aeronautics, )
• Test report no. PLBO/15: field tests of PERPRO tips grade RD107 copy turning steel B.S.4 

  College of Aeronautics, (Cranfield) (College of Aeronautics, )
• Polishing and lapping of silicon discs at Texas Instruments 

  Students of The College of Aeronautics (College of Aeronautics, )
• An explanation of the apparent bridgman effect in merchant's orthogonal cutting results 

  Oxley, P. L. B.; Welsh, M. J. M. (College of Aeronautics, )
• Test report no. PLBO/7 evaluation of PERPRO tools grade RD 92 machining EN 9 

  College of Aeronautics, (Cranfield) (College of Aeronautics, )
• The synthesis of a production information system 

  College of Aeronautics, (Cranfield) (College of Aeronautics, )
• Project P. 15 

  Beavis, D.; Strank, R. H. D.; Leamon, T. B. (College of Aeronautics, )
• The application of the numerical method of evaluating the efficiency of grinding wheels and coolants for grinding nickel chromium alloy to specification E.P.K.31 (Henry Wiggin Ltd.) also the evaluation of surface residual stresses induced into the material by grinding: progress report no. 2 

  Purcell, J. (College of Aeronautics, )
• An investigation into high precision control of the relative angular position of two shafts over a range of speeds and ratios 

  Healey, M. (College of Aeronautics, )
• Test report no. PLBO/13: VTn curves for tools of grade SIP, RD107 and RD110 when machining EN9 

  College of Aeronautics, (Cranfield) (College of Aeronautics, )
• Test report no. PLBO/12: comparison of modified forms of PERPRO carbide grade TO 348 when machining EN 9 

  College of Aeronautics, (Cranfield) (College of Aeronautics, )
• Horizontal band-saw 

  Foot, R. M.; Boardman, G. E. T.; Dailey, B. R.; Baller, E. G. A.; Noble, C. F. (College of Aeronautics, )

View more